Vello Freewave User Manual download pdf (Page 38)

Chapter 3: Configuration Application

LUM0030AB Rev C

Note: If you read a serial device's settings using the diagnostics cable, the device is

placed into Setup mode automatically and all three LEDs on the device turn

solid green. If you are reading a serial device's setting using the serial port, Tool

Suite prompts you to place the device into Setup mode.

Programming Devices

As you define the changes for a device in your network in the Configuration application, you can send the

changes to the device when it is connected to the computer running Tool Suite. You can also return the device

to its factory default settings.

Note: It is not currently possible to read a serial radio in the Configuration application

connected locally to the computer running Tool Suite. The TCP terminal server

network is only useful for network diagnostics where you want to gather

diagnostics of a serial network through a TCP/IP connection to a terminal

server.

Programming options are located above the tabs in the main Configuration application window, and display

when ToolSuite is reading a device.

1. Click Configuration in the Applications pane to display the Configuration application.

2. In the Networks section of the Configuration ribbon, select the network that contains the devices

you want to program.

3. Connect to the device and clickRead Radio to poll the device for its settings.

4. Make changes to the settings, as necessary.

5. Select one of the following programming options in the Network Title ribbon to send the settings to

the device:

Programming Options Description

All Sends all the settings to the device, even if you

have not made changes to a setting.

If you are programming an Ethernet device, you can

send the settings to another device in the network.

Enter that device's IPaddress when prompted.

Quick Sends only the settings that you have changed.

Note: The Quick programming option is only

available for changes made in the current session. If

you close Tool Suite or select a different device, the

Quick option is no longer applicable.

Default Sends the factory default settings for all parameters

to the device. Answer Yes at the prompt to set the

radio back to its factory default settings.

When the device is programmed, the device's Carrier Detect (CD) LED displays solid green and

the Clear to Send (CTS) LED displays solid red.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 109 110

No comments

Vello Freewave User Manual Page 38